Filter
Top Products
This cleaner uses a common automotive lamp #906,13.0 volts. For bulb replacement call 1-800-321-
1134 or your local auto paris store.
TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
Depress latch to remove dirt container
Pull bulb out of socket to
Replace lens. Secure the
from cleaner. Remove the two (2) screws remove. Do NOT twist. headlight lens by replacing
located on the inside of the (Diagram 1).
Gently push new bulb into
the two (2) screws.
Remove lens (Diagram la).
socket to replace.
IF OBSTRUCTION DEVELOPS DURING FLOOR CLEANING:
1.
If obstruction develops while cleaning carpets,
turn cleaner OFF and unplug.
Check to see if dirt cup is full
(Diagram
1);
empty if needed (Page 9).
2. Check dirt path window and lower hose (Diagram 2). Remove any obstruction.
3. Turn cleaner over and remove nozzle guard (Diagram 3). Clear any obstruction that occurs in or around
the brushroll area.
IF
OBSTRUCTION DEVELOPS DURING ABOVE FLOOR CLEANING:
1. If obstruction develops while above floor cleaning,
turn cleaner OFF and unplug.
Check to see if dirt cup
is full; empty if needed (Page 9).
2. Check airflow areas of hose (Diagram
4).
If there is no suction, disconnect hose. drop quarter through end. If
quarter comes out, there is NO blockage.