Filter
Top Products
WARNING: TO REDUCE RISK OF PERSONAL INJURY
-
UNPLUG CLEANER BEFORE SERVICING
PROBLEM
Cleaner won't
run
Cleaner won't
pick-up or low
suction
Water escaping
from cleaner
Cleaner won't
dispense
solution
1. Dirty water tank door not
installed.
2.
Dirty water tank is not
installed correctly.
3. Dirty water tank is full.
4. Dirty water passage
clogged.
POSSIBLE REASON
1.
Power cord not firmly
plugged into outlet.
2. Blown fuse or tripped breaker.
3. Needs service.
--
1. Insert dirty water tank door.
POSSIBLE SOLUTION
1.
Plug unit in firmly.
2. Check fuse or breaker. Replace
fuseheset breaker.
3. Take to service center or call
1-800-321 -1 134.
2.
Review Dirty Water Tank Removal
and Replacement
-
Pg.
9.
3. Empty Dirty Water Tank
-
Pg. 9.
4. Clean Dirty Water Tank
-
Pg.
9.
1.
Dirty Water Tank is full.
2.
Dirty Water tank not
installed correctly.
3.
Solution reservoir not
installed properly.
ANYOTHERSERVICINGSHOULDBEDONEBYAN
AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE
(1 -800-321 -1 134)
1. Empty Dirty Water Tank
-
Pg. 9.
2.
Review Dirty Tank Removal and
~eplacement
-
Pg. 8,9.
3. Review Solution Reservoir Installation
-
Pg.
7.
1.
Solution reservoir not
installed properly.
2.
Needs service.
In the event that further assistance is required, see your Yellow Pages for an authorized Royalm
Dealer. Costs of any transportation to and from any place of repair are to be paid by the owner.
The service parts used in this unit are easily replaced and readily available from an authorized
Royale Dealer or retailer. Always identify your cleaner by the model number and manufacturing
code when requesting information or ordering replacement parts. (The model number appears
on the bottom of the cleaner.)
1. Review carpet cleaning
-
Pg.
8.
2.
Take to service center or call
1-800-321 -1 134.