Filter
Top Products
C. Heater Thermostat Control
To adjust the temperature to your individual
requirements, turn the thermostat control upward
all the way to turn on the heater. When the room
reaches the desired temperature, turn the
thermostat knob downward until you hear a click.
Leave in this position to maintain the room
temperature at this setting. For additional heat, turn
upward until you hear the click again and the heater
will turn on.
Resetting The Temperature Cutoff
Switch
Should the heater overheat, an automatic cut out will
turn the fireplace off and it will not come back on
without being reset. It can be reset by switching the
Main ON/OFF switch to OFF and waiting 5 minutes
before switching the unit back on.
CAUTION
If you need to continuously reset the heater, disconnect
power and call Dimplex customer service at 1-888-
DIMPLEX (1-888-346-7539).
Remote Operation
The Fireplace is supplied with an integrated on/off
remote control
Note: Ensure that the fireplace Main ON/OFF
switch is set to the remote
Control setting.
To operate, push the ON button to turn fireplace on,
push the OFF button o turn the fireplace off.
14