Filter
Top Products
9
Built-In Instructions:
WARNING
The installation of the fireplace unit must comply
with the applicable local and/or national electrical
codes and utility requirements. This installation
should be entrusted to duly qualified personnel
where required by law.
1. Leave the frame uninstalled from the fireplace
chassis until step 13.
2. Prepare a wall opening following the dimen-
sions shown in Figure 5. Note that 4" minimum
depth including thickness of dry wall is
required. Make sure there is enough clearance
for the cable coming out from the bottom of the
fire place.
Figure 5
NOTE
Where there are close tolerances involved in wall
building or applications which require a great
degree of precision, we recommend that the
product itself be used to make the actual
measurements for the wall opening. Dimplex North
America will not be responsible for inaccuracies in
the design or manufacture of enclosures.