Filter
Top Products
UNIT INSTALLATION
SECURING DECORATIVE TOP PANEL TO UNIT
NOTE
Secure decorative top panel to unit after installing
unit to wall.
NOTE
Top panel brackets are left loose by the manufacturer
in order to be adjusted to match the engaging holes in
the back panel.
TOOLS
Slotted screwdriver
1. Place decorative top panel on top of unit.
2. Open door to achieve access to top panel
brackets.
3. Align top panel brackets with holes on
back panel.
4. If required, adjust top panel to achieve
a consistent gap above the door.
5. Secure decorative top panel to unit with
(2) screws per bracket. (screws included)
6. Tighten remaining 4 screws on decorative
top panel.
6
FIGURE 8
FIGURE 9