Dimplex DF3015 Indoor Fireplace User Manual


 
PURIFIRE ON/OFF BUTTON
Press the “Purifire™ On/Off” button to turn the Purifire™ function ON. When the
Purifire™ function is ON the Purifire™ symbol will flash. When off the symbol will be solid.
The default setting for the Purifire™ is set at low speed. Press the “Purifire™ On/Off” button
to turn the Purifire™ function OFF.
NOTE
To turn the Flame/Heat and Purifire™ “OFF” at the same time, press both control buttons
simultaneously.
SET TEMPERATURE
1. Press Flame Heat On/Off” button to turn fireplace on.
2. Press Temperature Up” to raise thermostat.
3. Press Temperature Down” to lower thermostat.
4. Press both “Temperature Up” and Temperature Down” to change °F to °C.
FLAME SPEED
1. Press the “Flame/Heat On/Off” button to turn the Flame/Heat ON.
2. Press the “Flame Speed Up” to increase the speed of the flame.
3. Press the “Flame Speed Down” to decrease the speed of the flame.
LIGHT DIMMER
1. Press the Flame/Heat button to turn the Flame/Heat ON.
2. Repeatedly press the “Light Dimmer Up” or “Light Dimmer Down” button to decrease or
increase the brightness of the upper lights.
CHILD LOCK
1. Depress tab on the battery cover on the back of the remote transmitter and remove the
battery cover.
2. Move Child Lock” tab to the right to lock the remote transmitter.
3. Move Child Lock” tab back to the left to unlock the remote transmitter.
4. Replace the battery cover.
NOTE
To temporarily unlock the remote transmitter press (in order) “Temperature Down” then
Temperature Up” then “Dimmer Down”.
When the remote transmitter’s backlight is illuminated the “Child Lock” is bypassed. When
the backlight is off the “Child Lock” is re-activated.
8
Child Lock Switch
LockedUnlocked
Figure 6