Desa W32KPA Indoor Fireplace User Manual


 
Tools required:
• #2 Phillips screw driver (3
1
2
" minimum length)
Slotted screw driver
Measuring tape
Pencil
Drill Driver
If any wood pieces are missing or damaged, contact the
dealer where you purchased this mantel for replacement.
If hardware or trim is missing or damaged, contact DESA
Heating Products at 1-866-672-6040 for referral and war-
ranty information. You can also visit DESA Heating Products'
technical service web site at www.desatech.com.
Note: Gather all mantel pieces together before assembling
mantel.
WARNING: Only use 1
1
/4" screws in pocket holes to
assemble mantel. Damage to mantel will result if other
screws are used for this purpose.
WARNING: Use only 1/2" or 3/4" screws with brack-
ets in hardware pack 118983-01. Damage to mantel will
result if other screws are used for this purpose.
W32KCSA and W32KPA
Wall Mantel and Base with Trim
ASSEMBLY AND INSTALLATION INSTRUCTIONS
IMPORTANT: Read entire instruction sheet before
assembling or installing mantel kit.
These mantels are only approved for use with any
DESA Heating Products 32" electric replace sys-
tem or rebox. Do not use mantel with any other
product.
This mantel kit contains the following:
Mantel pieces (unassembled)
Hardware package 117197-14
Black trim kit PT32
Trim kit hardware 102866-01
Bracket hardware kit (2) 118983-01
The hardware package 117197-14 contains the following:
• 64 - 1
1
4
" Screws
• 2 - Trim Plate
• 4 - Set Screws
• 2 - Trim Shim
2 - 3" Screws
The bracket hardware kit 118983-01 contains the following:
• 13 - Brackets
• 2 - Flat Brackets
• 36 - Wood Screws
Firebox
Perimeter
Trim Included
With This
Mantel
www.desatech.com