www.desatech.com
111253-01F32
ACCESSORIES
Purchase these replace accessories from your local retailer. If they
can not supply these accessories, call DESA’ at 1-866-672-6040.
for information. You can also write to the address listed on the back
page of this manual.
(Not Shown)
BL42DA - Textured Refractory
BL42DSA - Standard Refractory
BL42DHA - Textured Refractory Herringbone
BL42DHSA - Standard Refractory Herringbone
This brick liner adds a touch of style to your direct-vent replace.
Complete installation and operation instructions included in this
manual.
(Not Shown)
For all models.
(Not Shown)–
- Propane/LP Gas
- Natural Gas for 42
(Not Shown)
RLD42 - Rolled Louver, Black
FPD42 - Filligree Louver, Black
FPD42B - Filligree Louver, Brushed Brass
FPD42P - Filligree Louver, Platinum
FPD42PB - Filligree Louver, Polished Brass
ROLLED LOUVER TRIM KIT
(Not Shown)
LT42B - Brushed Brass
LT42P - Platinum
LT42PB - Polished Brass
(Not Shown)
HD42 - Black (2" Brow)
PERIMETER TRIM KIT (Not Shown)
PT42 - Black
PT42B - Brushed Brass
PT42P - Platinum
PT42PB - Polished Brass
MANUAL BLOWER KIT - BK
Manual variable control blower accessory provides better heat dis-
tribution. Complete installation and operation instructions included
in this manual.
BLOWER KIT - BKT
Provides better heat distribution. Blower turns off and on automati-
cally, as needed. Complete installation and operation instructions
included in this manual.
(Not Shown)
Standard On/Off Electronic Remote Control Kit
KIT - GWMT1 (Not Shown)
Allows easy wall access for thermostatic operation of your re-
place.
(Not Shown)
Allows burner system to be turned on and off with a wall switch.