Filter
Top Products
www.desatech.com
109493-01N12
OPTIONAL GAS LINE
INSTALLATION
Continued
and connections must be tested
for leaks after the installation
is completed. After ensuring
that the gas valve is on, apply
soap and water solution to all
forming show a leak. Correct
-
-
-
ate an unvented gas log set in
removed.
If you install a decorative gas appliance (vented
gas log), the decorative gas appliance must comply
with the Standard for Decorative Gas Appliance
for Installation in Solid Fuel Burning Fireplaces,
ANS Z21.60, Z21.84 or RG 2-72 and shall also be
installed in accordance with the National Fuel Gas
Code, ANSI 7223NFPA 54 latest edition.
has been used for wood burning,
cleaned of soot, creosote and
cleaner. Creosote will ignite if
heavily heated.
decorative vented gas log, the
damper must be removed or
permanently locked in the fully
open position and the glass
doors must be in the fully open
position.
GLASS DOOR
INSTALLATION
frame before installing glass
door.
1. Remove screws from smoke shelf (see
Figure 20).
2. Mount top door frame and secure with screws
removed in step 1.
3. Remove center brick by pulling ring handle
(see Figure 21).
4. Remove ash box.
5. Remove three screws located at front of re-
box (see Figure 21).
6. Align bottom rail mounting holes with holes
at front of rebox and secure with screws
removed in step 5.
7. Place ash box in place. Replace center brick.
Figure 20 - Installing Top Door Frame
Top Door
Frame
Smoke Shelf
Figure 21 - Installing Bottom Door Frame
Bottom
Door Rail
Ash Box
Center
Brick
Ring
Handle
Screws