Filter
Top Products
30
101309
OPTIONAL
POSITIONING
OF THERMOSTAT
SENSING BULB
For Masonry and
Factory-built
Metal Fireplace
Continued
Adhesive-backed
Mounting Clip
Figure 32 - Locating Thermostat Sensing Bulb on Masonry Fireplace
Thermostat
Sensing Bulb
If you have a factory-built metal fireplace, see Figure 33 for location.
Adhesive-backed
Mounting Clip
Thermostat
Sensing Bulb
Figure 33 - Locating Thermostat Sensing Bulb on Factory-built Metal Fireplace
If your fireplace has glass doors, position sensing bulb directly behind door gap on right
bottom side (see Figure 34).
Adhesive-backed
Mounting Clip
Glass
Doors
Figure 34 - Installing Thermostat Sensing Bulb behind Glass Doors
Thermostat
Sensing Bulb
5. The mounting clip must be a minimum of 3" from bottom of fireplace to prevent
crimping of capillary. Once you have decided on a location, clean the area
thoroughly. Remove the paper backing from the adhesive on back of mounting
clip. Press the clip into the new location so that the thermostat sensing bulb will
be positioned vertically with the capillary at the bottom (see Figure 35). Slide
the thermostat sensing bulb into the clip.
IMPORTANT:
Do not crimp capillary.
Capillary
Thermostat
Sensing Bulb
Do Not Crimp Capillary
Adhesive-backed
Mounting Clip
Figure 35 - Positioning the Thermostat Sensing Bulb in the Vertical Position
with the Capillary at the Bottom