Filter
Top Products
6
101857
TC25 and RCP25
PROPANE CONSTRUCTION HEATER
Burner
Tube
Primary Air
Opeinings
TROUBLESHOOTING
Continued
CHECKING FOR CORRECT
BURNER FLAME
WARNING: Heater shell, top,
and heated air from heater is very
hot during operation. Gradually
move in closer to heater to ob-
serve flame color. Do not touch
heater shell or top. Do not get too
close to heated air from heater.
Severe burns could occur.
Look through the ventilation holes in the top
of the heater to see the burner flame. The
burner flame should be mostly blue with
slight yellow coloring on the ends. If the
burner flame is mostly yellow, the primary
air openings on the burner tube under the
heater base may be blocked (see Figure 6).
1. Stop heater (see To Stop Heater on page
4) and let cool.
2. Turn heater over to locate the primary
air openings on the burner tube (see
Figure 6). Remove any debris blocking
the primary air openings.
Figure 6 - Bottom View of Heater
Rating(Btu/Hr) 15,000 to 25,000
Fuel Propane Vapor Only
Fuel Consumption
Gallons/Hour .17 minimum/.27 maximum
Pounds/Hour .70 minimum/1.16 maximum
Supply Pressure (To Regulator)
Maximum Tank Pressure
Minimum 40 psi
Regulator Outlet Pressure 15 psi
Weight (Pounds) 4.7
Shipping Weight (Pounds) 6.1
Heater Size - L x W x H (Inches) 11 x 13.4 x 12 .5
Shipping Size - L x W x H (Inches) 11.9 x 13.8 x 13
SPECIFICATIONS