Filter
Top Products
3
104129
OWNER’S MANUAL
PRODUCT
IDENTIFICATION
THEORY OF
OPERATION
The Fuel System: The hose/regulator
assembly attaches to the propane gas sup-
ply. This provides fuel to the heater.
The Ignition System: The piezo ignitor
lights the pilot fuel supply.
The Automatic Control System: The
automatic control valve shuts off the heater
if the flame goes out.
1. Remove all packing items applied to
heater for shipment. Keep plastic cover
caps (attached to valve inlet and hose/
regulator assembly) for storage.
2. Remove all items from carton.
3. Check all items for shipping damage.
If heater is damaged, promptly inform
dealer where you bought heater.
UNPACKING
Figure 1 - Product Identification
PROPANE SUPPLY
You must provide propane gas and propane
tank(s).
Use this heater only with a propane vapor
withdrawal supply system. See Chapter 5 of
the Standard for Storage and Handling of
Liquefied Petroleum Gas, ANSI/NFPA 58
and/or CAN/CGA B149.2.
Your local library
or fire department will have this booklet.
The amount of propane gas ready for use
from propane tanks varies. Two factors de-
cide this amount.
1. The amount of liquid propane gas in
tank(s)
2. The temperature of tank(s)
The chart below shows the minimum num-
ber of 100-pound tanks needed to run the
heater. Connect tanks together with a mani-
fold. Do not operate this product with any
tank smaller than 100 pounds.
Less gas is vaporized at lower temperatures.
Two or more 100-pound tanks or one larger
tank may be needed in colder weather. Your
local propane gas dealer will help you select
the proper supply system.
Average Temp. (ºF) Number
At Tank location of Tanks
60º 2
40º 2
32º 2
20º 2
10º 3
0º 3
Ignitor Electode
Thermocouple
Piezo Ignitor Button
Valve Inlet
Hose/
Regulator
Assembly
Main Burner
Valve Handle
Automatic Control
Valve Button
Base
Assembly
Top
Main
Burner
Tube
Nozzle
Emitter
Shell
Pilot Burner