Filter
Top Products
9
104025
INSTALLING
Continued
Figure 4 - Minimum Clearance to Walls and Ceiling
STOVE CAVITY ASSEMBLY
1. Lift off corrugated box enclosing stove body crating.
2. Remove all screws fastening the wood frame enclosure. Spread wood frame
open and lift away from plastic-bagged stove body. The bottom pieces of
pallet wood will remain bolted to the stove body.
3. Remove plastic bag from stove body.
4. Remove back panel from stove (see Figure 5). Use an adjustable wrench or a
10 mm socket. Remove six (6) bolts and washers. Keep bolts and washers to
reattach back panel later.
12"
Minimum
12"
Minimum
48"
Minimum
Ceiling
Side Wall Side Wall
Front View
Top View
Side View
Back Wall
Side Wall Side Wall
12
"
Minimum
12
"
Minimum
6
"
Minimum
6"
Minimum
48"
Minimum
Ceiling
Floor
Back Wall
Front of
Stove Unit
Continued
Figure 5 - Removing Back Panel
Bolt
Product
Identification
Label
Back Stove Panel
Corner
Wall
Wall
6
"
Minimum
6
"
Minimum