Filter
Top Products
3
103910
OWNER’S MANUAL
Air For Combustion Air For Heating
PRODUCT
IDENTIFICATION
Figure 1 - RCLP375B Model
1. Remove all packing items applied to
heater for shipment. Keep plastic cover
caps (attached to inlet connector and
hose/regulator assembly) for storage.
2. Remove all items from carton.
3. Check all items for shipping damage.
If heater is damaged, promptly inform
dealer where you bought heater.
UNPACKING
Power
Cord
On/Off Switch
Handle
Outer Shell
Hose /
Regulator
Assembly
Hot Air
Outlet
(Front)
Fan
Guard
Inlet Connector
THEORY OF
OPERATION
The Fuel System: The hose/regulator
assembly attaches to the propane gas sup-
ply. The propane gas moves through the
solenoid valve and out the nozzle.
The Air System: The motor turns the fan.
The fan pushes air into and around the
combustion chamber. This air is heated and
provides a stream of clean, hot air.
The Ignition System: The direct spark
ignitor (DSI) sends voltage to the ignitor.
The ignitor ignites the fuel and air mixture.
The Safety Control System: This sys-
tem causes the heater to shut down if the
flame goes out. The motor will continue to
run, but no heat is produced.
Cool Air In
(Back)
Motor
Nozzle
Clean
Heated
Air Out
(Front)
Power
Cord
Hose/
Regulator
Assembly
Solenoid
Valve
Ignitor
Combustion
Chamber
DSI
Fan
Air For Combustion
Air For Heating
Figure 2 - Cross Section Operational View