16
100791
INSTALLING
HEATER
Continued
Figure 12 - Inserting Top Edge of Glass Panel into
Upper Glass Retaining Channel
WARNING ICON G 001
CAUTION
Make sure you insert top edge of glass panels into the
upper glass retaining channel. Do not install glass
panels with top edge of glass in front of the upper glass
retaining channel. Glass panels will not automatically
go into the channel. You must guide the glass panels
into it. Incorrect installation will damage front of heater
due to excess temperatures.
6. Insert top edge of glass panel into the upper glass retaining channel (see Figure 12).
2
1
Glass
Panel
Lower Front Access Area
Upper Glass
Retaining Channel
7. Lower glass into lower glass retaining channel. Slide glass panel all the way to the
left side.
Note:
If you have chipped or cracked the glass panel during installation, do not
use. Contact your Vanguard dealer for a replacement glass panel.
8. Repeat steps 4 through 7 for all glass panels.
2
1
Glass
Panel
Figure 13 - Inserting Glass into Lower Retaining Channel
9. Reinstall glass guard. Reinstall lower front access panel of heater.
Lower Glass
Retaining Channel
Lower Glass
Retaining
Channel