Filter
Top Products
110148-01B
For more information, visit www.desatech.com
For more information, visit www.desatech.com
16
INSTALLATION
Continued
It is very important to install the logs exactly as instructed. Do not
modify logs. Only use logs supplied with fireplace.
1. For models VYGF33PRB and VYGF33NRB, place one-piece
log set on grate to fit as illustrated in Figure 28. For models
FPVF33PRA and FPVF33NRA, place one-piece log set on
grate to fit as illustrated in Figure 29. Make sure middle sec-
tion at bottom of log set is seated into "U"-shaped cutout in
center of chassis (see Figure 29).
IMPORTANT:
Make sure
log does not cover any burner ports (see Figures 30 and 31).
2. Install fireplace screen by slipping notches of fireplace screen
over screws on front of fireplace (see Figure 32).
WARNING: You must operate this fireplace with
the fireplace screen in place. Make sure fireplace
screen is in place before running fireplace.
Figure 28 - Installing One Piece Log Set (Models VYGF33NRB &
VYGF33PRB)
Figure 30 - Installing One Piece Log Set (Top View Models
VYGF33NRB & VYGF33PRB)
Notches
Figure 32 - Installing Fireplace Screen (Model VYGF33NRB
shown)
Screws for
Mounting Screen
One Piece
Log Set
Burner Ports
INSTALLATION
Installing Logs
O
F
F
P
I
L
O
T
O
N
H
I
L
O
Chassis
"U"-shaped
Cutout in
Chassis
One Piece
Log Set
Burner
Middle
Section at
Bottom of
Log Set
Figure 29 - Installing One Piece Log Set (Models FPVF33NRA &
FPVF33PRA)
O
F
F
P
I
L
O
T
O
N
H
I
L
O
Chassis
"U"-shaped
Cutout in
Chassis
One
Piece
Log Set
Burner
Middle Section
at Bottom of
Log Set
Figure 31 - Installing One Piece Log Set (Top View Models
FPVF33NRA & FPVF33PRA)
One Piece
Log Set
Burner Ports