Filter
Top Products
104163-01G
3
3
For more information, visit www.desatech.com
For more information, visit www.desatech.com
• Keep heater away from strong drafts, water spray, rain, or drip-
ping water.
• Do not leave heater unattended.
• Keep children and animals away from heater.
• Never move, handle, or service a hot, operating, or plugged-in
heater. Severe burns may result. You must wait 15 minutes after
turning heater off.
• To prevent injury, wear gloves when handling heater.
• Never attach duct work to front or rear of heater.
• Do not alter heater. Keep heater in its original state.
• Do not use heater if altered.
• Turn off propane supply and unplug heater when not in use.
• Use only original replacement parts. This heater must use de-
sign-specific parts. Do not substitute or use generic parts. Im-
proper replacement parts could cause serious or fatal injuries.
PRODUCT IDENTIFICATION
SAFETY INFORMATION
Continued
Hot Air Outlet
(Front)
Outer Shell
Motor
Power Cord
Piezo
Ignitor
Button
Automatic
Control Valve
Button
Hose/Regulator
Assembly
Handle
Figure 1 - 30,000 BTU/Hr Model
FUNDAMENTALS OF
OPERATION
The Fuel System: The hose/regulator assembly attaches to the
propane gas supply. This provides fuel to the heater.
The Air System: The motor turns the fan. The fan pushes air into
and around the combustion chamber. This air is heated and provides
a stream of clean, hot air.
The Ignition System: The piezo ignitor lights the burner.
The Automatic Control System: This system causes the heater to
shut down if the flame goes out.
Figure 2 - Cross Section Operational View
Air For Combustion Air For Heating
Clean
Heated Air
Out (Front)
Fan
Motor
Cool Air In
(Back)
Combustion
Chamber
Hose/Regulator
Assembly
UNPACKING
1. Remove all packing items applied to heater for shipment. Keep
plastic cover caps (attached to inlet connector and hose/regu-
lator assembly) for storage.
2. Remove all items from carton.
3. Check all items for shipping damage. If heater is damaged,
promptly inform dealer where you bought heater.
SAFETY INFORMATION
PRODUCT IDENTIFICATION
UNPACKING
FUNDAMENTALS OF OPERATION