Desa FLAME-MAX VintageOak Electric Heater User Manual


 
110399-01B
For more information, visit www.desatech.com
For more information, visit www.desatech.com
4
LOCAL CODES
Install and use heater with care. Follow all local codes. In the
absence of local codes, use the latest edition of The National Fuel
Gas Code ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
Note:
Where listed vented decorative logs are required, thermostat
operation is not permitted.
1. Remove logs and heater base assembly from carton.
Note:
Do
not pick up heater base assembly by burners. This could dam-
age heater. Always handle base assembly by grate.
2. Remove all protective packaging applied to logs and heater
for shipment.
3. Check all items for any shipping damage. If damaged, promptly
inform dealer where you bought heater.
UNPACKING
CAUTION: Do not remove the data plates from the
grate assembly. The data plates contain important
warranty and safety information.
OPTIONAL REMOTE
CONTROL ACCESSORIES
There are four optional remote controls that can be purchased
separately for Remote-Ready Models Only:
wall switch hand-held ON/OFF remote
wall thermostat hand-held thermostat remote.
See Accessories, page 31.
The wall thermostat or hand-held thermostat may not be used where
vented decorative listing is required.
PRODUCT IDENTIFICATION
Figure 1 - Product Identification
Burner
Flame-Max
®
Vintage Oak Logs
Control Knob
Flame-Max
®
Golden Oak Logs
Piezo Ignitor
Burner Assembly
A
U
T
O
O
N
O
F
F
C
O
O
L
E
R
W
A
R
M
E
R
T
E
M
P
Piezo
Ignitor
Five Piece Log Set
(One-Piece Log Set
for 36" Models)
Five Piece Log Set
(One-Piece Log Set
for 36" Models)
Optional
Remote
Control
Control Knob
Flame Adjustment Knob
Optional Selector Switch
Base Assembly
Control Knob
Piezo Ignitor
Burner Assembly
Two Piece
Log Set
PRODUCT IDENTIFICATION
OPTIONAL REMOTE CONTROL ACCESSORIES
LOCAL CODES
UNPACKING