Filter
Top Products
107172-01J
15
15
For more information, visit www.desatech.com
For more information, visit www.desatech.com
WARNING: You must operate this fireplace with
the fireplace screen in place. Make sure fireplace
screen is in place before running fireplace.
Figure 29 - Installing Front Log
Figure 31 - Installing Rear Log
Figure 30 - Installing Middle Log
Figure 28 - Installing Fireplace Screen
INSTALLATION
Continued
Notches
Screws for
Mounting Screen
INSTALLATION
Installing Logs (Cont.)
INSTALLING LOGS (MODELS EFS33NRA,
EFS33PRA, VSGF33NRA, AND VSGF33PRA)
WARNING: Failure to position the parts in accor-
dance with these diagrams or failure to use only parts
specifically approved with this heater may result in
property damage or personal injury.
CAUTION: Do not remove the data plates attached
to the heater base assembly. The data plates contain
important safety and warranty information.
It is very important to install these logs exactly as instructed. Do not
modify logs. Only use logs supplied with heater.
1. Place front log on top of the grate. Make sure the notches in
the bottom of the log fit over the grate prongs (see Figure 29).
Push back of logs flush with metal grate bars.
2. Rest middle log behind metal posts on grate assembly. Make
sure the grooves in the bottom of the log fit over the grate. Bring
the log forward next to the metal posts (see Figure 30).
3. Slide the grooves in the back of the rear log against the rear
grate prongs. Make sure the log fits securely over the prongs
(see Figure 31). Make sure log is completely vertical and not
leaning in toward burner where the flame will touch the log.
4. Install fireplace screen by slipping notches of fireplace screen
over screws on front of fireplace (see Figure 28).
Front Log
Grate
Prongs
Metal
Grate
Bars
Notch
Middle Log
Metal Post
Grate
Groove
Groove
Rear Log
Grate Prong
Grate Prong
Groove in
Back of Log
Groove in
Back of Log