Filter
Top Products
-3-
595-5551-09
Battery
Battery
Tune Settings
Your wireless chime has different selectable tunes: Ding (one note), Ding-
Dong (two note), or Westminster (eight note) (Available on selected chimes).
The factory setting is for the Ding-Dong tune (or Westminster, when avail-
able). This tune can be changed by following the instructions below.
• Ding (one note tune)
Pushbutton: Add a jumper to location 8.
• Ding-Dong (two note tune)
Pushbutton: Remove jumper from location 8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected chimes)
Pushbutton: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. We recom-
mend the back door use the Ding tune and the front door use the Ding-
Dong tune (or Westminster tune, available on selected chimes). Models
that include two pushbuttons will come factory set for front and back doors.
Decals on the rear of the pushbutton will indicate its setting.
12345678
Pushbutton Battery Replacement
Install an alkaline type A23 12 Volt battery. The
positive terminal should be positioned as shown.
* Code Settings 1-7
Must Match Both
Pushbutton and
Chime
Inside
Pushbutton
Inside Chime
Tune Setting
(Not used on
all models)
Tune Setting
12345678
Note: Some models might re-
quire the use of tweezers to re-
move and replace the jumpers.