Filter
Top Products
This package includes (Style of pushbutton and chime may vary from illus-
tration):
• Wireless chime
• Wireless pushbutton w/battery
• Hardware pack
You'll need to buy 2 "C" alkaline batteries for the chime. In typical use,
alkaline batteries will last up to one year.
Wireless Chime
3.Install 2 alkaline "C"
batteries. Make sure
batteries are oriented
properly.
2.Open chime case.
Press in catch on bot-
tom of chime and lift the
case open.
5. Mount pushbutton and chime.
Use either screws or double sided tape to mount
pushbutton.
To mount with screws, remove back of case by
pushing in tab on bottom with a small screwdriver.
© 2003 DESA Specialty Products™ 595-5551-09
Case Style "A"
Case Style "B"
4. Test range. Temporarily position chime and
pushbutton where you want them mounted.
Press pushbutton to verify chime and
pushbutton work properly. If chime does not
sound, see Troubleshooting.
Battery
Battery
12345678
1.Install alkaline type A23 12 volt pushbutton
battery. Remove back of case by pushing in
tab on bottom with a small screwdriver. Make
sure battery is oriented properly (see page 3).