CAUTION: "RISK OF BURNS"
DO NOT OPERATE HEATER WITHOUT INSTALLING THE PROTECTIVE GUARD OR GRILLE.
1. REMOVE THE HEATER AND ALL PACKING MATERIALS FROM THE BOX.(Fig. 2)
NOTE : Save the shipping carton and packing
materials for future storage.
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
3
¢Ł
UNPACKING AND ASSEMBLY
•Heater.
•Top guard.
•Handle.
•Top plate
•2 “C”cell batteries.
•Siphon pump.
Bag of screws for top grille assembly.
Owner's manual.
Safety Tips Manual.
2. ASSEMBLING.
A) Remove all packing materials from heater.
(Fig. 3)
B) MOUNTING TOP PLATE: (Fig. 4)
Place the top plate on the cabinet.
Make certain the two(2) holes on
inner top plate align with carrying
handle hole on the cabinet.
C) INSTALLING FRONT AND REAR GUARDS:(Fig. 5)
•Insert the upper portion of the grill rods of the front guard
into the Hole by pushing downward as you insert the grill
rods into the Upper Grille brackets that is linked to
Cabinet.
•Insert the lower portion of the grill rods of the front guard
into the Hole by pushing as you insert the grill rods into
the Lower Grill brackets that is linked to Cabinet.
•Install the rear guard in the same way.
Top plate
Carrying handle
Top guard
Batterys
Rear guard
Front guard
Siphon Pump
Top guard Screws
Fig.2
Fig.4Fig.3
Fig.5
Fig.5