Filter
Top Products
14
100792
INSTALLING
HEATER
Continued
INSTALLING RADIANTS
WARNING ICON G001
WARNING
Carefully handle the glass panel. Glass edges are
rounded and buffed to prevent cuts, however, chipped
or broken sections of glass can present sharp edges.
These sharp edges can cut skin.
1. Remove glass guard from across opening at front of heater (see Figure 8).
2. Place radiants into combustion chamber through opening at front of heater.
Front of radiant sits on front radiant support (see Figure 9, page 14). Back of
radiant rests on back radiant support (see Figures 8 and 9).
Note:
Radiants should never come in contact with burner flame. Contact with
flame may cause carbon or soot deposits on radiants.
Glass
Guard
Burner
Combustion
Chamber
Back Radiant
Support
Lower Front
Access Area
Glass Retaining Channel
Lower
Front Access
Panel
Figure 10 - Position of Radiant
Radiant
Figure 9 - Location of Radiants
Back Radiant Support
Burner
Front Radiant
Support