Filter
Top Products
17
103414
OWNER’S MANUAL
3
2
4
4
INSTALLATION
Continued
INSTALLING LOGS
WARNING: Failure to position
the parts in accordance with these
diagrams or failure to use only
parts specifically approved with
this heater may result in property
damage or personal injury.
Each log is marked with a number. These
numbers will help you identify the log when
installing. It is very important to install
these logs exactly as instructed. Do not
modify logs. Only use logs supplied with
heater.
1. Slide rear log (#1) into place behind
rear burner. Make sure flat areas at bot-
tom of log are behind rear burner (see
Figure 36).
Tab
Figure 37 - Installing Bottom Mid Log
Bottom Mid Log (#2)
Rear Log (#1)
Front Log (#3)
Figure 38 - Installing Front Log
Top Log (#4)
Figure 36 - Installing Rear Log
Figure 39 - Installing Top Log
Figure 40 - Installing Fireplace Screen
WARNING: You must operate
this fireplace with the fireplace
screen in place. Make sure fire-
place screen is in place before
running fireplace.
Notches
Screws for
Mounting Screen
2 . Slide bottom mid log (#2) into place in
behind front burner. Make sure tabs at
bottom of log are behind front burner
(see Figure 37).
3. Place front log (#3) into place in front
of bottom mid log (#2) (see Figure 38).
Make sure notches on bottom rest on
grate prongs.
4. Finally place top log (#4) over bottom
mid log (#2) by matching the notches
under log (#4) with the raised blocks
of log (#2) (see Figure 39).
5. Install fireplace screen by slipping
notches of fireplace screen over screws
on front of fireplace (see Figure 40).
CAUTION: Do not remove the
metal data plates attached to the
heater base assembly. The data
plates contain important warranty
information.