Filter
Top Products
This mantel can be used with DESA Heating, LLC electric
replaces. Electric replaces install from the front of mantel.
To install electric replace see replace instruction manual.
Install vertical support (see Figure 6).
Figure 7 - Installing Mantel Trim
Finishing Nails
Trim Strips
123672-01
Rev. A
07/08
Figure 6 - Installing Vertical Support
Vertical
Support
#11
1
1
/
4
" Screws
1
1
/
4
" Screws
Base Support #10
Top
Center
Support
1. Carefully push mantel and base into position in corner
and ush against both walls. Check operation of replace
before proceeding.
2. Place right trim strip on right side of top and left trim on left
side of top. Align both pieces so any gaps between mantel
and wall are covered as well as possible and front of trim
strips are ush with side of top. With one person holding
trim strips in place, nail each strip to mantle using nishing
nails included in hardware kit and nail set.
123672 01
NOT A UPC
DESA Heating, LLC
2701 Industrial Drive
Bowling Green, KY 42101
www.desatech.com
1-866-672-6040