Filter
Top Products
15
105539
OWNER’S MANUAL
VENTING
INSTALLATION
Continued
HIGH ALTITUDE
INSTALLATION
Your Vanguard direct-vent fireplace has
been AGA tested and approved for eleva-
tions from 0-2000 feet and CGA certified
for elevations from 0-4500 feet.
When installing this fireplace at an elevation
above 2000 feet (in the USA), you may need
to decrease the input rating by changing the
existing burner orifice to a smaller size. Re-
duce input 4% for each 1000 feet above sea
level. Check with your local gas company for
proper orifice size identification.
When installing this fireplace at an eleva-
tion above 4500 feet (in Canada), check
with local authorities.
Consult your local gas company to help de-
termine the proper orifice for your location.
For assistance with any high altitude instal-
lation contact DESA International’s Tech-
nical Service Department at 1-800-DESA-
LOG (1-800-337-2564).
PARTS LISTS FOR VENTING
KITS AND COMPONENTS
Vanguard Rigid Venting
Number Description
BGFVK Basic Ground Floor Rigid Vent Kit
Includes: 7" x 60° Elbow, Extended
Adjustable Horizontal Termination,
Wall Thimble and 14 Screws
GFVK Ground Floor Rigid Vent Kit
Includes: 7" x 60° Elbow, 7" Adjust-
able Galvanized Coaxial Pipe (7-12"),
Wall Thimble, Horizontal Termina-
tion, RTV Silicone and 16 Screws
BVK Basement Rigid Vent Kit
Includes: 7" x 30° Elbow, 7" x 4'
Galvanized Pipe, 7" x 90° Elbow, 7"
Adjustable Galvanized Pipe (7-12"),
Wall Thimble, Horizontal Termina-
tion, RTV Silicone and 20 Screws
CVK Corner Vent Kit
Includes: 7" x 30° Elbow, 7" x 90°
Elbow, 7" Adjustable Galvanized
Pipe (7-12"), 6" Pipe, Wall Thimble,
Horizontal Termination, RTV Sili-
cone and 20 Screws
Number Description
SVK Snorkel Rigid Vent Kit
Includes: 7" x 30° Elbow, 7" x 4'
Galvanized Pipe, 7" x 90° El-
bow, 7" Adjustable Galvanized
Pipe (7-12"), Wall Thimble, 36"
Snorkel Termination, RTV Sili-
cone and 28 Screws
RVF Roof Rigid Vent Kit
Includes: Flue Restrictor, Storm
Collar, 7" x 30° Elbow, 7" x 4'
Galvanized Pipe, 7" x 2' Galva-
nized Pipe, 7" Adjustable Gal-
vanized Pipe (7-12"), Firestop
Support, Roof Flashing, RTV
Silicone, Vertical Termination,
and 26 screws
D1000 7" x 12" Galvanized Coaxial
Pipe(6 pcs.)
D1010 7" x 24" Galvanized Coaxial
Pipe(6 pcs.)
D1020 7" x 48" Galvanized Coaxial
Pipe(6 pcs.)
D1030 7" Adjustable (7-12")
Galvanized Coaxial Pipe
(6 pcs.)
D1050 7" x 6" Galvanized Coaxial Pipe
(6 pcs.)
D2000 7" x 90° Elbow (6 pcs.)
D2010 7" x 45° Elbow (6 pcs.)
D2020 7" x 30° Elbow (6 pcs.)
D2030 7" x 60° Elbow (6 pcs.)
D3000 Wall Strap/Offset Support
(6 pcs.)
D3010 Storm Collar (6 pcs.)
D3020 Wall Thimble (6 pcs.)
D3050 Vertical Restrictor (6 pcs.)
D3060 Ceiling Firestop/Support (6 pcs.)
D3070 Rectangular Horizontal Rigid
Vent Termination Cap
D3090 Cathedral Ceiling Support Box
D4000 Roof Flashing 6/12-9/12
D4010 Roof Flashing 9/12-12/12
D4020 Flex Connector (6 pcs.)
D4030 Flex Wall Thimble (6 pcs.)
D4040 4" Hose Clamp (6 pcs.)
D4050 7" Hose Clamp (6 pcs.)
D5000 Wood/Vinyl Siding Standoff
(6 pcs.)
SIMPSON DURA-VENT GS
4" x 6
5
/8 "
Number Description
Available from DESA International:
SD2040 Simpson Dura-Vent GS
30° Elbow (6 pcs.)
SD2050 Simpson Dura-Vent GS
60° Elbow (6 pcs.)
Available from Simpson Dura-Vent
Only:
902 7" x 48" Pipe
903 7" x 36" Pipe
904 7" x 24" Pipe
906 7" x 12" Pipe
907 7" x 9" Pipe
908 7" x 6" Pipe
911 7" Adjustable (11"-14
5
/8") Pipe
940 Wall Thimble
941 Cathedral Ceiling Support Box
943 Roof Flashing 0/12-6/12
943S Roof Flashing 7/12-12/12
945 7" x 45° Elbow
950 Vinyl Siding Standoff
953 Storm Collar
963 Ceiling Firestop
981 36" Snorkel Termination
984 Horizontal Termination Vent Cap
988 Wall Strap
990 7" x 90° Elbow
991 Vertical High Wind Termination
Vanguard Flexible Venting
Number Description
BFGFVK Basic Flex Ground Floor Vent Kit
Includes: Flex Adapter, 7" x 2'
Flexible Pipe, 4" x 2' Flexible
Pipe, Wall Thimble, Horizontal
Termination, (2) Spacer Springs,
(2) 4" Hose Clamps, (2) 7" Hose
Clamps, and 10 Screws
FGFVK Flex Ground Floor Vent Kit
Includes: Flex Adapter, 7" x 4'
Flexible Pipe, 4" x 4' Flexible Pipe,
Wall Thimble, Horizontal Termi-
nation, (4) Spacer Springs, (2) 4"
Hose Clamps, (2) 7" Hose Clamps,
RTV Silicone, and 10 Screws
D1040 7" x 25' Coaxial Flex Pipe
with Spacer Springs
D3080 Rectangular Horizontal Flex
Termination Cap
Vanguard Rigid Venting
(Cont.)