Filter
Top Products
14
OPERATION (cont.)
Emptying the Drain Tank
During COOL mode, condensate will accumulate in the drain tank.
When the drain tank becomes full, the FULL TANK LED will flash and
the unit will shut off automatically.
NOTE: If you want to empty the drain tank, while the unit is in
operation, press the COOL ON/OFF button to turn the unit off. If a
program is running, you must first press the Program RUN button.
➀ Open the drain tank lid.
➁ Pull the drain tank from the unit.
➂ Remove the cap and empty the
drain tank.
➃ Replace the cap and return the drain tank to the unit.
➄ Close the drain tank lid.
➅ If the Program RUN LED is flashing, press the COOL ON/OFF
button to continue running the program. If the Program RUN LED is
illuminated continuously, no further steps are necessary. If no
program exists or the program was deactivated, press the COOL
ON/OFF button to restart the unit.
CAP