Filter
Top Products
3
HOW TO USE
BE CAREFUL
Operate the heater in upright position only. Any other position could create hazardous
situations!
1. LOCATION
Place the heater on the floor beneath the coldest window in the room or any desired location. Your heater will minimize
the effect of cold drafts. The heater must not be located immediately below an outlet. Do not use this heater in rooms
having a surface area less than 45 sq. ft (4 m
2
).
2. CONNECTION
The radiator must be connected to a properly polarized A/C 120 V household outlet in perfect working conditions.
Keep loose clothing or bedding, furniture and flammable material away from the wall outlet where the heater plug is fit-
ted in.
3. GROUND FAULT INTERRUPTION SAFETY DEVICE (GFI PLUG)
This device provides protection against electric shock due to ground fault currents by auto-
matically shutting off the power. To test the operation of the GFI plug switch the heater ON
at either the 1 or 2 setting. Press the TEST button on the GFI plug device attached to the plug
end of the power cord. The heater should stop operating and the Power Light should turn off.
Press the RESET button on the GFI plug device to resume normal operation of the heater. This
device should not be used as on ON/OFF operation switch.
“CAUTION: ALTHOUGH THIS DEVICE IS PROVIDED WITH PROTECTION
WHICH REDUCES THE RISK OF ELECTRIC SHOCK, THIS PRODUCT SHOULD NEVER BE USED CARELESSLY NEAR WATER.”
located is well ventilated during this operation. It is normal for the appliance to emit small
cracking sounds when you turn it on for the first time.
23. Do not cover the appliance while it is functioning in order to avoid overheating with the attendant risk of
fire.
SAVE THESE INSTRUCTIONS
For Household use only
With pilot lights ON, the heater is ON!
POWER ECONOMIZER
For more economical use, the Min. or Med. power switches may be
used individually, after unit has reached the operating temperature.
ON/OFF Switches
500
WATTS
700
WATTS