Filter
Top Products
7. MAINTENANCE AND SERVICE
Always remove the plug from the power socket and allow the radiator to cool. Wipe radiator
with a soft damp cloth. Do not use detergents and abrasives.
Should the radiator not be in use over a certain length of time, wrap the cable round the hol-
der and store it in a dry place. This appliance has been built to give many years of trouble free
service.
In case of malfunction or doubt, do not try to repair the heater by yourself: it may results in fire
hazard or electric shock.
Call nearest Service Center (see attached list of Service Centers).
The appliance is fitted with a safety device which will switch off it in case of accidental overheating. To
reset, disconnect the plug from the power for 30 minutes, remove the cause of overheating then plug the
appliance in again.
ATTENTION: in order to avoid any danger caused by an accidental resetting of the safety
system, this appliance must not be powered through an external timer.
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
5
GB/E 4-06-2004 15:33 Pagina 5