Filter
Top Products
6. Eco function
In this operating mode the appliance will
automatically set the power level to gua-
rantee the best comfort reducing the
energy consumption. In this operating
mode the unit may switch the heating
power level from maximum to minimum
and viceversa, several time in an hour. The
maximum temperature setting is 79°F
(26°C). To activate this function, press the
ECO button (D). The unit, will always start
at the maximum power.
7. If you want the appliance to distribute the
airflow over a larger area, press the oscil-
lation button (C) ( ). The appliance will
then oscillate right and left. To stop the
oscillation in the desired position, just
press oscillation button (C) again.
8. To turn off the appliance press button
ON/OFF (A). The display could show the
count down for about 6 seconds.
NOTE: The display can show the temperature
in both °F and °C. To change the temperature
scale, press and hold the + key for few
seconds, then release.
Please be informed that as this is not a preci-
sion device, the showed temperature not
necessary corresponds to the real one.
24-HOUR DIGITAL TIMER
This function can be activated from any opera-
ting mode.
Delayed switch-on: with the appliance in the
OFF position, press the timer button (E)
( ).
The display shows the symbol and the
time remaining before switch-on. To set the
timer, use the + and - adjustment buttons
(B), then wait a few seconds for the pro-
gramming to be set. The display returns to
show “
●” for stand-by and the symbol
to indicate you have set the timer. When the
programmed time has been reached, the
appliance turns on with the same settings it
had during the previous operation.
Delayed shut-off: With the appliance on, press
the timer button (E) ( ). The display
shows the symbol and the time remai-
ning before shut-off. To set the timer, use
the + and - adjustment buttons (B), then
wait a few seconds for the programming to
be set. The display returns to show the cur-
rent settings and the symbol to indicate
you have set the timer. When the program-
med time as been reached the appliance
shuts off automatically.
If you want to go back to operation without the
timer, press the timer button (F) twice.
The timer symbol disappears from the
display.
USING THE REMOTE CONTROL
- The remote control functions correspond
to those on the control panel. See the sec-
tion “Operation and Use" on the previous
page for a description of the functions.
Inserting or replacing the batteries
- Remove the cover on the rear of the remo-
te control;
- Insert two AAA (R03/1.5V) batteries
(included but packaged separately)
making sure they are in the correct posi-
tion (see the instructions inside the battery
compartment);
- Do not mix old and new batteries;
- Do not mix alkaline, standard (carbon-
zinc), or rechargeable (ni-cad, ni-mh, etc)
batteries
- Replace the cover;
- Old batteries must be removed and dispo-
sed of in accordance with current legisla-
tion as they are harmful to the environ-
ment.
MAINTENANCE
- Before carrying out any maintenance,
always remove the plug from the power
outlet.
- During the season when the appliance is
being used, regularly clean the air intake
and outlet grilles using a vacuum clea-
ner.
- Never use abrasive powders or solvents to
clean the appliance.
- Remove the back grille by pulling it
outward (Fig. 1).
- Remove the dust filter that filters impuri-
ties from the air taken in from the room,
blow it lightly, then reposition it in the
appliance.
WARNINGS
- Never use this heating appliance in the
immediate vicinity of a bathtub, shower, or
swimming pool.
- Use the appliance always and only in the
vertical position.
- Do not use the appliance to dry laundry,
6