Filter
Top Products
7
ADJUSTABLE WINDOW BRACKET
Pinguino is equipped with an adjustable
window bracket. If you have a sash window,
position the external unit outside the window,
place the bracket on the window sill, extend the
bracket fully within the window frame, making
the hose passing through the slot and lower
the window onto the bracket.
Thanks to the wing nut, it’s possible to use the
window bracket also for sliding windows.
MODELS WITH SPECIAL COUPLINGS
If your air-conditioner is fitted with the special
rapid-fit coupling, the hose which connects the
internal unit to the external unit can also be
passed through a round hole in an external wall
(diameter: 6 cm. approx.).
In this case, it is necessary to disconnect the
internal unit as follows:
1) Remove the plug from the wall socket.
2) Remove the rear panel (on the back of the
appliance) by unscrewing the two retaining
screws.
3) Remove the metal brackets which fasten
the hose to the appliance.
4) Using a 24mm spanner, unscrew the union
on the coupling. When doing this, use a
19mm. spanner to block the extremity of the
hose in position.
Repeat this operation for the second union.
5) Detach the condensation hose from its
coupling.
6) Disconnect the electrical connector socket
by pressing the two retainer tabs.
The path of the connector hose should be as
straight as possible, without sharp curves or
kinks.
OFF
ø6
cm 30
O
N
I
O
F
F