Filter
Top Products
6
The sheathing that connects the external to the
internal unit may pass:
a) through a slightly-open window or door;
b) through a small hole 2.16” x 0.98” (2.5 cm x
5.5 cm) drilled in the lower part of a door or in
a window frame by using the frame provided.
c) through a small hole in the window bracket. If
you have a sliding window, place the bracket on
the window sill, extend the bracket fully within the
window frame, fit the bracket by turning the wing
nut and lower the window onto the bracket after
having passed the sheathing through the slot.
With the wing nut it’s possible to use the window
bracket also for sliding windows.
If you have a sliding door, use the additional set
provided in order to extend the accessory to the
desired length; joining the two parts, adjust the
total length according to your needs then, fit the
bracket with the relevant nuts, close the door and
connect the hose.
Setting up
PAC400 24-04-2003 16:29 Pagina 6