Filter
Top Products
11
(REFER TO THE CONTROL PANEL ON THE OPPOSITE PAGE)
This appliance is fitted with a special safety circuit. When the compressor switches off, this cir-
cuit prevents it from switching on again for at least 3 minutes.
Plug the appliance into the outlet.
Select the “programmed” or “non pro-
grammed” mode (see previous page)
Select the fan speed required pressing
“Fan speed” key C.
Turn the thermostat to
Max. Cold.
Press key A (ON/OFF).
ON/OFF signal lamp
(conditioning) will
come on.
The appliance comes on.
If not, refer to pag. 13.
To switch off the appliance, press key A
(ON/OFF main switch).
AIR-CONDITIONING
How to operate the air conditioner
PAC400 24-04-2003 16:29 Pagina 11