Filter
Top Products
4
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
1. LOCATION
Place heater on floor beneath coldest window in the room or any desired location. Your heater
will minimize the effect of cold drafts.
The heater must not be located immediately below a socket-outlet.
2. FASTENING THE FEET
Remove the feet and the fastening screws from the bag. Turn the
appliance upside-down on a soft surface, to avoid ruining the
paintwork.
Insert the feet as shown in the figure 1, making sure
they are inserted completely: the teeth A at the bottom
must be coupled to the feet. Finally, fasten the feet
using the two screws.
3. CONNECTION
The heater must be connected to a properly polarized A/C 110/120 V household outlet in
perfect working conditions.
Keep loose clothing or bedding, furniture and flammable material away from the wall outlet
where the heater plug is fitted in.
4. FAN HEATER CONTROLS:
HOW TO USE YOUR HEATER
FIG. 2
AA
FIG. 1
thermostat dial
These two
leds indicate
the selected
power
As the appliance cycles between
the different powers when it is in
use, these two leds indicate the
power the appliance is using.