Filter
Top Products
Retrò
4
How to switch the radiator off
To switch the radiator OFF position the switch in the "0" position
(in the middle position).
Adjusting the thermostat
When the room has reached the desired temperature, turn the
thermostat knob slowly in an anticlockwise direction until you hear
a click and the radiator turns off (indicator light off).The thermostat
will now keep the temperature in the room constant, turning the
heater on and off as appropriate.
Frost protection function
With the thermostat knob in position and the switch in the II posi-
tion, the radiator maintains the room at a temperature of about 5˚C,
preventing freezing with minimum energy consumption.
Cleaning and maintenance
The heater should not require any maintenance. However before
attempting to clean the heater, unplug from the mains and wait for
it to cool (this should take around 30 minutes). It is sufficient to
remove external dust with a soft, dry cloth. Never use abrasive
powders or solvents. If necessary, remove concentrated areas of
dirt with a vacuum cleaner.
Warnings
- Do not use the heater in a bathroom or in the vicinity of bath-
tubs, wash basins, showers or swimming pools.
- Never use the heater to dry laundry.
- Never rest the power cable on the heater’s elements while it is hot.
- Only use the heater in an upright position.
- The heater must be positioned at least 50cm from furniture or
other objects.
- If the supply cord is damaged, it must be replaced by the manu-
facturer, its service agent or similarly qualified persons in order
to avoid a hazard.
- It is normal for the heater to make ‘crackling’ noises during its first
use (or if it has not been used for a long time).
- The body of the heater is filled with an exact quantity of oil. If repairs
are necessary which call for the opening of the heater, they must be
done only by the manufacturer or an authorised service centre.
- In the unlikely event of oil leakage, contact the manufacturer or an
authorised service centre.
- Do not use this radiator in rooms which have a floor area small-
er than 4m
2
as this may lead to overheating.