Filter
Top Products
3
Retrò
Thank you for choosing this De’Longhi radiator. To get the
very best out of your new radiator it is advisable to read
these instructions before using it.This will ensure that you
gain optimum results and use the appliance safely.
General instructions
1. Take the radiator out of its packaging and remove any poly-
styrene pieces or any other packaging material that might be
lodged inside it.
2. Check that neither the radiator nor the power cable has been
damaged in any way during transportation.
3. Do not operate the radiator if damaged.
Easy wheel system
Turn the radiator upside-down on a rug or a soft surface in order to
prevent damaging the paint finish.
Fully unfold the castors by turning them outwards (Fig.1).
Turn the radiator back to its upright position.
Electrical connection
- Before plugging the radiator into the mains, check that your supply
voltage is the same as that shown on the rating plate of the radiator.
- If using more than one appliance at a time, it is important to
ensure that the ring main is adequate to cope with the power
requirements.
- It is important to ensure that the socket is adequately earthed.
- This appliance complies with EEC directive 89/336 regarding
electromagnetic compatibility.
Instruction for use
Using for the first time
On using the radiator for the first time we advise that you turn it
on to the maximum power setting for up to 8 hours. This is to
eliminate the heater’s “new odour”. During this time ensure that
the room is well ventilated.
Operation and use
Turning the appliance on
Insert the plug into the mains socket and switch on turning the ther-
mostat knob clockwise until it can be turned no further, then posi-
tion the switch up in the I position (minimum power) or down in the
II position (maximum power).The indicator light will come on.
We suggest that on days when temperatures are not praticularly
cold. Select minimum output to optimize savings on energy con-
sumption.