Filter
Top Products
6
TIMER OPERATION (ON MODELS EQUIPPED WITH TIMER ONLY)
Turn the timer knob to the position desired (1-2-3-4 hours). The appliance will operate for the
set period of hours.
- Turning the heater ON: turn the function selector knob to setting , 1, or 2. The yellow
pilot light will turn on.
- Summer ventilation setting: turn the function selector knob to setting . (The yellow pilot
light will turn on).
- Minimum power setting (750W): turn the function selector knob to setting 1.
- Maximum power setting (1500W): turn the function selector knob to setting 2.
- Turning the heater OFF: turn the function selector knob to setting 0. The yellow pilot light
will turn off.
Setting the adjustable thermostat:
Turn the thermostat knob in a clockwise direction until it reaches the maximum setting.
When the room has reached the desired temperature, slowly turn the thermostat knob counter-
clockwise until you hear a “click”, and not beyond that point. The thermostat will now adjust
the set temperature automatically keeping it constant.
Anti-freeze function
Turn the function selector knob to setting 2, then turn the thermostat knob to setting .
When it is set in this way the appliance keeps the room at a temperature of approx. 41° F (5° C ) with
minimal energy consumption.
Note: on models equipped with timer, the timer knob must be set to “manual”.
Turning the heater off after usage: once done using the heater, turn the function selector to
position 0, the thermostat knob to the position and the timer knob in the “ OFF”position,
then remove the plug from the electrical outlet.
MAINTENANCE AND SERVICE
Always remove the plug from the power socket and allow the heater to cool. After the heater
has cooled, clean it with a soft damp cloth, do not use detergents or abrasives. Periodically
clean the air intake and outlet grilles when the heater is in use with a vacuum cleaner.
Should the heater not be in use over a certain length of time, store it in a dry place.
This appliance has been built to provide many years of trouble free service.
In case of malfunction, do not try to repair the heater yourself: it may result in fire hazard or
electric shock. Call the nearest Service Center (see attached list of Service Centers).
ATTENTION: Thermal Cut-Off Overheat Protection System
A safety device switches the fan heater off if it accidentally overheats and the red pilot lamp
(CAUTION) will turn on. To reset the unit for normal operation, remove the plug from the mains
outlet for a few minutes, eliminate the cause of overheating (e.g. air intake or outlet grilles
obstructed) and then plug the fan heater back in again. Contact your nearest Service Center if
the fan heater does not begin normal operation again.
This heater is also equipped with a tip-over-switch for extra safety. This device turns the appli-
ance off should it fall over or if it is not perfectly stable. To restart the appliance, simply place it
upright again.