Filter
Top Products
5
19.Check that neither the appliance nor the power cable have been damaged in any way dur-
ing transportation.
20.CAUTION: to prevent electric shock match wide blade of plug to wide slot, fully inserted.
21.Do not cover the appliance while it is functioning in order to avoid overheating with the
attendant risk of fire.
SAVE THESE INSTRUCTIONS
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is an
important safety feature. If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not ignore the safety purpose of the polarized plug.
CAUTION
- This heater includes a thermal Cut-Off Overheat Protection System that shuts the unit off if it over-
heats due to abnormal conditions. If this occurs, the Overheat Safety Light “red” will turn on. Turn
the heater “Off”, unplug it, and inspect and remove any objects on or adjacent to the heater. Allow
it to cool for a few minutes, plug it back in, and resume normal operation.
- Always use the heater in an upright position.
- Do not use the heater to dry your laundry. To prevent the danger of overheating, never
obstruct the intake and outlet grilles.
- The appliance must be installed so that the switches and other controls cannot be reached
from a person standing in a bathtub or a shower.
- The power cord must be replaced only by officially authorized personnel.
ELECTRIC POWER CONNECTION
This heater must be connected to a properly polarized AC 110/120 Volts household outlet in
perfect working condition.
Keep loose clothing or bedding, furniture and flammable material away from the wall outlet
where the heater is plugged in.
INSTALLATION
This fan heater can be easily positioned on any horizontal support surface in an upright position.
MANUAL OPERATION
Turn the timer knob to the “manual” position (on models equipped with timer only).
- Turning the heater ON: turn the function selector knob to setting , 1, or 2. The yellow
pilot light will turn on.
- Summer ventilation setting: turn the function selector knob to setting . (The yellow pilot
light will turn on).
- Minimum power setting (750W): turn the function selector knob to setting 1.
- Maximum power setting (1500W): turn the function selector knob to setting 2.
- Turning the heater OFF: turn the function selector knob to setting 0. The yellow pilot light
will turn off.
Voltage Wattage See rating label