Filter
Top Products
Tower Fan Safety Precautions
Page 7Page 10
Using your Tower Fan
Operation
1. Press the POWER button to start the
fan. The fan will rotate anti-clockwise
as shown below:
2. Adjust the fan speed by pressing the
SPEED button. There is three
different speed modes: low / medium
/ high
3. WIND button is used to set the fan to
natural wind mode.
4. 2/4/8 hour time can be set by
pressing the TIMER button
5. The fan can be oscillated in three
different angles: 60 / 120 / 180
d e g r e e s b y p r e s s i n g t h e
OSCILLATION button.
6. Press the POWER button to turn off
the fan. The fan will rotate clockwise
to the starting position.
Note: Do not hinder fan oscillation. All
LED’s will flash if fan oscillation
movement is abnormally restricted.
Do not plug into the power socket if
Ÿ
assembly is incomplete.
Use only with the rated voltage.
Ÿ
Never insert fingers, pencil, or any
Ÿ
object through the guard when fan is
running.
Appliance not to be used by young
Ÿ
children. Keep children away from the
fan.
Power plug must be removed from
Ÿ
power socket before cleaning,
servicing, maintenance and move from
one location to another.
Be sure the fan is placed on a stable
Ÿ
surface when operating to avoid
overturning.
The fan should not be placed in a damp
Ÿ
place or where humidity is high (such as
in a bathroom).
Electrical connections shall be in
Ÿ
accordance with National or Local
Codes.
Do not hinder fan oscillation. All LED’s
Ÿ
will flash if fan oscillation movement is
abnormally restricted.
The appliance is not intended for use by
Ÿ
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to
Ÿ
ensure that they do not play with the
appliance.
For indoor use only.
Ÿ
This appliance is designed exclusively
Ÿ
for household use. All other uses are
strictly forbidden.
Do not operate the fan in the presence
Ÿ
of explosive and/or flammable fumes.
The appliance must be used with a
Ÿ
standard electrical supply (240V AC
only, 50 Hz), properly grounded in
accordance with the local codes and
regulations.
The fuse (or circuit breaker) size should
Ÿ
be 10 amperes.
Operate the appliance on a dry level
Ÿ
surface.
To protect against electric shock do not
Ÿ
place the fan on a window sill.
Keep ventilation openings clear of
Ÿ
obstruction.
This appliance is intended to be used in
Ÿ
household and similar applications eg:
- staff kitchen areas in shops, offices
and other working environments;
- farm houses and by clients in hotels,
motels and other residential type
environments;
- bed and breakfast type environments;
-Catering and similar non-retail
applications.
Avoid contact with moving fan parts.
Ÿ
Do not use attachments not
Ÿ
recommended by the manufacturer, it
may be hazardous.
Do not hang or mount the fan on a wall
Ÿ
or ceiling.
Do not operate the fan if the housing is
Ÿ
damaged.