Filter
Top Products
4
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
1. LOCATION
Place heater on floor beneath coldest window in the room or any desired location. Your heater will
minimize the effect of cold drafts.
The heater must not be located immediately below a socket-outlet.
2. FASTENING THE FEET
Remove the feet and the fastening screws from the bag. Turn the
appliance upside-down on a soft surface, to avoid ruining the
paintwork.
Insert the feet as shown in the figure 1, making sure they
are inserted completely: the teeth A at the bottom must be
coupled to the feet. Finally, fasten the feet using the two
screws.
3. CONNECTION
The heater must be connected to a properly polarized A/C 110/120 V household outlet in perfect
working conditions.
Keep loose clothing or bedding, furniture and
flammable material away from the wall outlet
where the heater plug is fitted in.
4. SWITCHING ON THE APPLIANCE (FIG. 2)
• Turn the thermostat knob in a clockwise
direction until it reaches the maximum setting.
• Heating at full power: press both the foot
switches (min + med). The lights will come on.
• Heating at medium power: press only the
foot switch "med". Only the light "med" will
come on.
• Heating at minium power: press only the foot
switch "min". Only the light "min" will come
on.
5. SETTING THE THERMOSTAT
When the room has reached the required temperature, turn slowly the thermostat knob counter-
clockwise until the lights go out but no further.
Having been set in this way, the temperature will automatically be regulated and kept at a constant
level by the thermostat.
6. ANTIFREEZE FUNCTION
Set the switch to "on" and then turn the thermostat knob to " " setting. When it is set in this way
the appliance keeps the room at a temperature of approx. 42°F (5°C) with minimal energy
expenditure.
HOW TO USE YOUR HEATER
foot switches
FIG. 2
AA
FIG. 1