Filter
Top Products
PAGE 8 OF16
Cleaning and maintenance
Gas Jet Cleaning Procedure
•
Every six months the gas jets on your hob should be cleaned to
ensure continued efficient and safe operation.
•
This may be done using a Gas Jet Cleaning Kit which may be pur-
chased from your nearest Defy Service Centre.
•
The kit comprises of a sliding T-bar (A) a socket (B) and a
‘Classic pin’ (C).
•
Fit the T-bar to the socket and remove the pot stands, burner
caps and burner bodies.
1. Insert the socket into the central tube of the burner so that it lo-
cates over the brass gas jet at the bottom of the tube.
2. Gently loosen the brass gas jet by turning the socket in a anti-
clockwise direction.
3. Carefully lift the socket and loosened brass gas jet from the cen-
tral burner tube.
4. Insert the Classic pin into central hole of the jet and slide it up and
down until the jet is free of accumulated dirt.
5. Re-assemble in reverse order.
6. Clean all the burner jets in the manner described above.
JET CLEANING KIT
A
B
C
1
2
3
4