Filter
Top Products
PAGE 4 OF16
Installation
Good ventilation is essential for the safe operation of the stove. Do not install the stove in a room
below ground level unless it is open to ground level on at least one side. Prolonged extensive use
of the stove may call for additional ventilation, for example an open window or dedicated extrac-
tion fan that exhausts to the outside.
Do not stand the stove on a carpet..
To fit the levelling feet, proceed as follows:
• Remove any loose burner components and oven shelves.
• Secure the glass lid and oven door to prevent accidental opening.
• With the help of an assistant, incline the stove forwards ( fig 1)
• Screw the rear levelling feet in place (fig 2)
• Thereafter incline the stove to the rear ( fig 3)
• Screw in the front levelling feet ( fig 4)
• Fit the front left and front right leg covers as shown and attach them using a Philips screw
driver and screws. ( fig 5 and fig 6 )
• Avoid dragging the stove on an irregular floor as this could damage the feet.
• Position the stove and adjust the levelling feet as required to ensure a stable and level stance.
PARTS