Defy Appliances 520 Stove User Manual


 
PAGE 5 OF 12
Anti-Tilt mechanism
Method 2
“A” 1 x Stability chain
“B” 1 x Stability hook with anchor sleeve
“A” is factory fitted at the rear of the stove in the centre.
Position the stove and move “A” to touch the wall behind the stove.
Mark the hole where “A” touches the wall behind the stove.
Move the stove away from the wall to allow for an area to work in.
Using a 8.0 mm concrete bit, drill a hole at the marked position.
Using the Stability hook and anchor sleeve “B”, firmly secure “B” to the wall.
Slide the stove back in position and engage the stability chain “A” onto the Stability
hook “B”.
The stove is then secured and will not accidentally tilt if downward pressure is applied
to the open oven door.