Filter
Top Products
PAGE 7 OF 12
The Control Panel (501 Model Only)
Electrical Installation
Position the stove on a solid level surface
near an accessible plug point.
• The stove is a plug-in model with a
15Amp. Power supply.
• Push the electric plug into a 230V. 15A.
earthed wall socket.
Selector Knob
• It is not possible to use all the elements
at the same time.
• Set the selector to the required position.
• Do not set the knob to the unmarked
position.
Bake and 2 small plates
Grill and 2 small plates
3 Plates
Baking (501 Model Only)
For best baking results, use an
aluminium bake tray (300 x 230 x
30mm.) These are available from all Defy
Parts Centres
Part number 067609.
Teflon coated baking trays are not
recommended.
• Set the selector to - Bake and 2 small
plates
• Set the oven control to the desired
temperature.
• The indicator light will glow and remain
on until the oven has reached the
selected temperature.
• When the indicator light switches off, the
food should be placed in the oven.
• During baking the indicator light will
regularly cycle on and off as the oven
thermostat maintains the selected
temperature.
• The door may be opened, for inspection
purposes, after about half the cooking
time has elapsed.
Grilling (501 Model Only)
Keep the oven door closed during
grilling.
• Place the oven shelf on the top shelf
position.
• Set the selector to - Grill and 2 small
plates.
• Set the oven control to the Grill symbol
on the knob.
• Place the item to be grilled in a roast pan
on the shelf under the pre-heated grill
element.
• The oven door may be opened to check
on the grilling process which should be
done every 5 to 10 minutes to avoid
burning the food.
• The oven control must be turned to the
OFF position when grilling is complete.