Dayton 1RVT7 Electric Heater User Manual


 
Your patio heater is equipped with preset mounting
hardware. Figures 2.6 and 2.7 illustrate various
mounting configurations using the preset mounting
bracket. This hardware allows the heater to be installed
at an angle between 0° and 30°. This angle must not
exceed 30° from horizontal.
Assemble the mounting hardware as shown in figure 2.5.
The mounting hardware is adjustable in one inch
intervals using the connecting arms Refer to figure 2.2
on page 9 for an illustration of the minimum and
maximum extentions of the mounting bracket.
Wall Mounting Bracket
Dayton Installation, Operation, Maintenance and Parts Manual
Dayton Patio Heaters
®
1RVT7 and 1RVT8
12
Mounting
bracket attached
to ceiling.
Mounting bracket
attached to wall.
Figure 2.6 - Typical Side Wall Mounting
30°
30°
0° Mounting Angle
30° Mounting Angle
30° Mounting Angle
0° Mounting Angle
Figure 2.7 - Typical Ceiling Mounting
Figure 2.5 - Mounting Bracket Assembly