Danby DPAC120061 Air Conditioner User Manual


 
Remote Control Operating
Instructions (cont’d)
6. Swing: Press the “Swing” button to
activate the automatic air swing (oscillation)
feature. The swing symbol will appear in the
display window confirming the "swing" feature is
activated. To deactivate the “swing” feature, press
the swing button again.
7. RESET: Using a narrow object (e.g. pencil),
depress the recessed “R” button to cancel all
remote control programs. This will erase “all”
information contained within the remote control
display window (including time of day clock
setting).
8. C & F: Press either of the temperature buttons to
select (increase / decrease) operating tempera-
tures. Press both buttons simultaneously to
switch from “Celsius” to “Fahrenheit”.
9. SLEEP: NOTE: The sleep mode feature can
only be programmed using the hand held remote
control.
The sleep mode allows you to program a set
cooling temperature that will gradually increase
the set operating temperature “+0.5ºC / 0.9º F”
(during night time sleeping hours) resulting in
less compressor running time saving energy
consumption and preventing the room from
becoming too cold during sleeping hours. See
table for temperature differentials during an 8
hour period.
EXAMPLE:
Time Period (Operation) Temperature Increase
(Above Set Temperature)
1st Hour +0.5ºC
2nd Hour +0.5ºC
3rd Hour +0.5ºC
4th Hour +0.5ºC
5th Hour +0.5ºC
6th Hour +0.5ºC
7th Hour +0.5ºC
8th Hour Automatically returns to
Set Operating
Temperature
1) Press the “Sleep” button on the remote
control.
2) The set temperature will appear in the display
window of the remote.
3) Press the temperature buttons to select
the required “set” operating temperature.
4) The unit is now programmed for sleep mode
NOTE: When turning off the main unit with the
remote control, there may be a delayed (off)
reaction (5-15 seconds) before the unit actually
stops. This is normal.
rnal Water Tank
Feature Works
18
2
3
4
5
6
8
Timer On/Off
LCD Window
9