Filter
Top Products
6 7
How to program phone numbers:
You can enter a maximum of nine telephone numbers for the alarms. Each number can be
a maximum of 32 digits. (If you are using this Auto Dialer on an oce/work phone system
you may have to enter 9 before the number to get a line out.)
1. Key in the four digit user password code (factory default is 1234.)
2. Press PROGRAM > 3 > ENTER.
3. The number you press next will select the position in the sequence you want that
telephone number to dial (1 = rst number called, 2 = second number called, and so on).
4. Press ENTER and key in the rst telephone number.
5. Press ENTER to exit the programming mode.
6. Repeat the process until you have entered all the numbers you wish the Auto Dialer to
call once it has been activated (maximum 9 dierent numbers.)
Quick guide: Press 1 2 3 4 > PROGRAM > 3 > ENTER > 1 > ENTER > Telephone # > ENTER
How to delete phone numbers:
1. Key in the four digit user password code (factory default 1234.)
2. Press PROGRAM > 3 > ENTER.
3. Press N (N = 1 for the rst number called; 2 for the second number called; etc.)
3. Press ESC to exit the programming mode.
Quick guide: Press 1 2 3 4 > PROGRAM > 3 > ENTER > N > ESC
AD-01 Slave Manual.indd 7 10/15/2009 10:20:44 AM