Filter
Top Products
6 7
Advanced Operations
HOW TO PROGRAM THE AUTO DIALER
*If no key is pressed for 30 seconds, the dialer will automatically exit the programming mode.
Notice: The system must be in the OFF mode for all programming.
How to record the voice messages:
Alarm 1 = Trigger 1. Alarm 2 = Trigger 2.
1. Key in the four digit user password code (factory default is 1234.)
2. Press RECORD.
3. Press 1 (to save as the message for alarm 1) or 2 (to save as the message for alarm 2).
4. Press ENTER to start recording your 10 second message.
5. Press ENTER to stop the recording early or wait for the 10 seconds to end.
Quick guide: Press 1 2 3 4 > RECORD > 1 > ENTER, record message now
How to play back the message:
Press 1 2 3 4 > PLAY > 1 > ENTER to play back the recorded message.
(Notice: 1 = the rst message, 2 = the second message).
AD-01 Slave Manual.indd 6 10/15/2009 10:20:44 AM