Filter
Top Products
How to change the user password code (factory default is 1234):
1. Key in the four digit user password code (factory default 1234.)
2. Press PASSWORD
3. The LCD will change to n-p.
4. Key in your new four digit user password code.
5. The LCD will change to c-p.
6. Key in your new four digit user password code again.
7. The LCD will change to acc.
Quick guide: Press 1 2 3 4 > PASSWORD > New Code > Conrm New Code
How to program the Auto Dialer to give an audible alarm as well as sending a voice
message (factory default is alarm ON):
1. Key in the four digit user password code (factory default 1234.)
2. Press PROGRAM > 1 > ENTER
3. Press N (N = 0 for without audible alarm, 1 for with audible alarm). Press ENTER.
Quick guide: Press 1 2 3 4 > PROGRAM > 1 > ENTER > N > ENTER
How to set the time the alarm will sound on activation (default time is 3 minutes):
1. Key in the four digit user password code (factory default 1234.)
2. Press PROGRAM > 2 > ENTER
3. Press Time (Time = 1 for one minute, 2 for 2 minutes, etc. up to 99 minutes). Press ENTER.
Quick guide: Press 1 2 3 4 > PROGRAM > 2 > ENTER > Time > ENTER
8 9
CAD-05 Kit Manual.indd 8 10/15/2009 9:40:53 AM