Filter
Top Products
ENGLISH
90
Before you start operating the air conditioner, set the clock of the remote contro-
ller using the procedures given in this section. The clock panel on the remote con-
troller will display the time regardless of whether the air conditioner is in use or not.
Initial Setting or the Clock
When batteries are inserted in the remote controller, the clock panel will display
"0:00" and the colon will flash.
(1) Initial Setting or the Clock
•
Push this button to set time.
Forward.
Backward.
•
Each time you push the button, the time moves forward or backward by one
minute depending on which side you Push. The time alters as quickly as you
push the button.
(2) OK button
•
When you push the OK button, the clock time display stops flashing and the
clock starts operating.
(3) Readjusting the Clock
•
Push the CLOCK button in the battery compartment, the colon in the clock dis-
play will start to flash. To set the new time, follow 1 and 2 of "Initial Setting of
the Clock".
* Clock accuracy is within 10 seconds per day.
SETTING THE CLOCK
Static electricity or other factors (in case of extremely high voltage) can cause
remote controller clock initialize. If your remote controller is initialized (flashing
of the colon in "0:00"), readjust the clock before you start operation.
CAUTIONS
Clock
06ManualMandoDaitsuEng 21/12/06 16:17 Página 90